תיאור המוצר
- מותג: Audison
- דגם: TH uno
- גליון נתונים טכני: לחץ להורדה
- מדריך למשתמש: לחץ להורדה
The Thesis TH amplifiers are manufactured using state-of-the-art analog and digital technology. Class A amplification stage, multi-standard analog and digital inputs and the control of the amplifier through a microprocessor make this product the most evolved among the Audison range.
TH uno is a single channel (mono) amplifier used to achieve maximum performance under any load; capable of delivering up to 2300 W into 1 Ohm and 200 W in the audiophile A Class mode. Specifically designed to drive systems and subwoofers with self-assured mastery.
TH uno is a single channel (mono) amplifier used to achieve maximum performance under any load; capable of delivering up to 2300 W into 1 Ohm and 200 W in the audiophile A Class mode. Specifically designed to drive systems and subwoofers with self-assured mastery.
Power Output
Load Imp. | Mono | |
Dual Power – Hi-Current | 4 Ohm | 850 W x 1 |
2 Ohm | 1500 W x 1 | |
1 Ohm | 2300 W x 1 | |
Dual Power – A Class | 4 Ohm | 200 W x 1 |
Amp Chain | 2 Ohm (2 Amp) | 4500 W x 1 |
Features
- DRC – Digital Remote Control
The DRC mounted in the vehicle dashboard provides access to the functions of all the Thesis amplifiers installed in the system, all within your immediate grasp.
Providing source selection between analog and optical inputs, it also controls the essential functions you need to access frequently.
מפרט טכני
- Power Supply :
Voltage: 11 ÷ 15 VDC
Idling current (@ Dual Power Setting): 2.2 ÷ 8.5 A
Idling current when off: 0.04 mA
Consumption @ 14.4 VDC, 1 Ω, Max Musical Power: 132 A
Remote In: 7 ÷ 15 VDC (1 mA)
Remote Out: 12 VDC (20 mA)
Fuse (AFS): 150 A - Amplifier stage :
Distortion – THD @1 kHz, 4 Ω; 90%Power: 0.01 %
Bandwidth @ -3 dB, 2 VRMS, 4 Ω: 5 ÷ 40k Hz
S/Nratio@Aweighted, 1V,MaxPower: 106 dBA
Damping factor @ 1 kHz, 2 VRMS, 4 Ω: 500
Pre-In sensitivity: 0.3 ÷ 4.8 VRMS
Pre-In impedance: 15 kΩ
Loadimpedance (Min @DualPowerMode- Hi-Current):
• 1 Ch 1 Ω
Nominal power (RMS) @ 12 VDC, 1% THD:
Dual Power Mode – Hi-Current:
• 1 Ch @ 4 Ω 590 W x 1
Dual Power Mode – A Class:
• 1 Ch @ 4 Ω 165 W x 1
Output power (RMS) @ 14.4 VDC, 1% THD:
Dual Power Mode – Hi-Current:
• 1 Ch @ 4 Ω 850 W x 1
• 1 Ch @ 2 Ω 1500 W x 1
• 1 Ch @ 1 Ω 2300 W x 1
Dual Power Mode – A Class:
• 1 Ch @ 4 Ω 200 W x 1
Amp Chain Mode (two linked amplifiers):
• 4 Ω 3000 W
• 2 Ω 4500 W - CEA SPECIFICATION :
Output power @ 4 Ω, 1% THD+N, 14.4 V: 700 W x 1 Ch
SN ratio (ref. 1 W output): 75 dBA - Other functions :
ASC (Audison Status Controller) FUNCTIONS
AMP IDentifications, DUAL POWER settings,
AD Link inputs, AC Link digital bus, DRC controls,
ACNet software, Status Monitor, Protections - Inputs/Outputs/Filters :
Inputs: PRE – S/PDIF (Max 192 kHz / 24 bit) Optical and AD Link
Outputs: PRE Bypass / AD Link
Filters: Removable kit: (Hi-pass / Lo-pass / Bandpass 12/24dB)
32 steps 18 ÷ 7.5k Hz with 8 standard & 2 customizable modules
Special Function (Linked Amplifiers): Master/Slave Bridged; Slave Chain - Size :
Max size (mm/inches): 259 x 510 x 67 / 10”1/4 x 20”1/8 x 2”11/16
Weight (kg/lb): 10,3 / 22.71
סרטון