אתה לא מחובר.

תפריט משתמש
תמונה ראשית

TH due | 1500W POWER AMPLIFIER

תמונה קטנה תמונה קטנה תמונה קטנה
סרטון
תיאור המוצר
The Thesis TH amplifiers are manufactured using state-of-the-art analog and digital technology. Class A amplification stage, multi-standard analog and digital inputs and the control of the amplifier through a microprocessor make this product the most evolved among the Audison range.
TH due is a bridgeable stereo amplifier: a logical choice and natural partner for systems where versatility, power and quality are the main parameters.

Power Output

Load Imp Mono Stereo
Dual Power – Hi-current 4 Ohm 1000 W x 1 300 W x 2
  2 Ohm 1500 W x 1 500 W x 2
  1 Ohm 750 W x 2
Dual Power – A Class 4 Ohm 80 W x 2

Features
  • DRC – Digital Remote Control
    The DRC mounted in the vehicle dashboard provides access to the functions of all the Thesis amplifiers installed in the system, all within your immediate grasp.
    Providing source selection between analog and optical inputs, it also controls the essential functions you need to access frequently
מפרט טכני
  • Power Supply :
    Voltage:
       11 ÷ 15 VDC
    Idling current (@ Dual Power Setting):   2.0 ÷ 7.4 A
    Idling current when off:   0.04 mA
    Consumption @ 14.4 VDC, 1 Ω, Max Musical Power:   105 A
    Remote In:   7 ÷ 15 VDC (1 mA)
    Remote Out:  12 VDC (20 mA)
    Fuse (AFS):   100 A
  • Amplifier stage :
    Distortion – THD @1 kHz, 4Ω;90%Power:  
    0.02 %
    Bandwidth @ -3 dB, 2 VRMS, 4 Ω:   5 ÷ 70k Hz
    S/N ratio@Aweighted,1V,MaxPower:   106 dBA
    Damping factor @ 1 kHz, 2 VRMS, 4 Ω:   100
    Pre-In sensitivity:   0.3 ÷ 4.8 VRMS
    Pre-In impedance:   15 kΩ
    Loadimpedance (Min @DualPowerMode- Hi-Current):
    • 2 Ch   1 Ω
    • 1 Ch   2 Ω
    Nominal power (RMS) @ 12 VDC, 1% THD
    Dual Power Mode – Hi-Current:
    • 2 Ch @ 4 Ω
       230 W x 2
    Dual Power Mode – A Class:
    • 2 Ch @ 4 Ω  
    55 W x 2
    Output power (RMS) @ 14.4 VDC, 1% THD:
    Dual Power Mode – Hi-Current:
    • 2 Ch @ 4 Ω
       300 W x 2
    • 2 Ch @ 2 Ω   500 W x 2
    • 2 Ch @ 1 Ω   750 W x 2
    • 1 Ch @ 4 Ω   1000 W x 1
    • 1 Ch @ 2 Ω   1500 W x 1
    Dual Power Mode – A Class:
    • 2 Ch @ 4 Ω
       80 W x 2
  • CEA SPECIFICATION :
    Output power @ 4 Ω, 1% THD+N, 14.4 V:
    300 W x 2 Ch
    SN ratio (ref. 1 W output):   80 dBA
  • Other functions :
    ASC (Audison Status Controller) FUNCTIONS
    AMP IDentifications, DUAL POWER settings,
    AD Link inputs, AC Link digital bus, DRC controls,
    ACNet software, Status Monitor, Protections
  • Inputs/Outputs/Filters :
    Inputs:  
    PRE – S/PDIF (Max 192 kHz / 24 bit) Optical and AD Link
    Outputs:   PRE Bypass / AD Link
    Filters:   Removable kit: (Hi-pass / Lo-pass / Bandpass 12/24dB)
    32 steps 18 ÷ 7.5k Hz with 8 standard & 2 customizable modules
  • Size :
    Max size (mm/inches):  
    259 x 510 x 67 / 10”1/4 x 20”1/8 x 2”11/16
    Weight (kg/lb):   10,3 / 22.71
סרטון