- מותג: Hertz
- דגם: ML Power 5
- גליון נתונים טכני: לחץ להורדה
- מדריך למשתמש: לחץ להורדה
The ultra-versatile Hertzaudio car amplifier ML Power 5 (100 W x 4 + 550 W 2 Ω) provides the ability to drive a Mille system including the subwoofer. The HRC BM (Hertz Remote Control Bass Management), low frequencies level remote control, is optional.
Accessories
HRC BM – Hertz Bass Management
The remote control HRC BM – Bass Management, optional for MLPower 1, provides the ability to adapt the subwoofer level (-20 / + 6 dB) to any personal preference and favorite music genre.
Data table
| Channel mode | 5 – 3 |
| Output Power (RMS) @ 14.4 VDC |
5 Ch 70 W x 4 + 380 W x 1 (4Ω) 5 Ch 100 W x 4 + 550 W x 1 (2Ω) 3 Ch 200 W x 2 (4Ω) + 380 W x 1 (4Ω) 3 Ch 200 W x 2 (4Ω) + 550 W x 1 (2Ω) |
| Filters
Hi-Pass |
A Ch: 40 ÷ 150 Hz @ 12 dB/Oct. – B Ch: 80 ÷ 3.3k Hz @ 12 dB/Oct. C Ch: 40 ÷ 150 Hz @ 24 dB/Oct. A Ch: 40 ÷ 150 Hz @ 12 dB/Oct. – 80 ÷ 3.3k Hz (LO) @ 12 dB/Oct. |
| Distortion – THD (100Hz @ 4Ω) |
0.08 % |
| S/N Ratio (A weighted @ 1V) |
100 dB A & B Ch – 106 dB C Ch |
| Damping factor (100Hz @ 4Ω) |
50 A & B Ch – 90 C Ch |
| Size W x D x H mm (in.) |
170 x 349 x 46.70 – (6.69' x 13.74' x 1.84') |
Input / Output
Technologies
-
ADVANCED D-CLASS TECHNOLOGYEnsures pure listening pleasure while keeping a compact size with unmatched power efficiency.
-
LEDS STATUS DISPLAYIt monitors the amplifiers operating status in real time pointing out possible faults such as overheating, excessive loads on the outputs or short-circuits on cables or loudspeakers. This information allows the user to identify possible issues with the installation and to intervene before the amplifier goes into protection to prevent any damages.
-
HDP IN & ART(TM)The ML Power IN module features a Speaker In input (with balanced circuitry minimizing noise) for OEM head units and an RCA IN input for aftermarket sources. When the Speaker In is used, the ART™ function (Automatic Remote Turn On-Off) is enabled, managing the amplifier remote turn on to avoid unpleasant “bumps”.
-
ADVANCED HEATSINKThe heat sink, engineered with double technology, extrusion and aluminium die-casting, enables the Mille Power amplifiers to work constantly at full power without ever overheating, further maximizing thermal efficiency.
- Channel mode 5 – 3
- Output Power (RMS) @ 14.4 VDC :
5 Ch 70 W x 4 + 380 W x 1 (4Ω)
5 Ch 100 W x 4 + 550 W x 1 (2Ω)
3 Ch 200 W x 2 (4Ω) + 380 W x 1 (4Ω)
3 Ch 200 W x 2 (4Ω) + 550 W x 1 (2Ω) - Filters :
Hi-Pass A Ch: 40 ÷ 150 Hz @ 12 dB/Oct. – B Ch: 80 ÷ 3.3k Hz @ 12 dB/Oct.
Lo-Pass C Ch: 40 ÷ 150 Hz @ 24 dB/Oct.
Band-Pass A Ch: 40 ÷ 150 Hz @ 12 dB/Oct. – 80 ÷ 3.3k Hz (LO) @ 12 dB/Oct. - Distortion – THD (100Hz @ 4Ω) 0.08%
- S/N Ratio (A weighted @ 1V) 100 dB A & B Ch – 106 dB C Ch
- Damping factor (100Hz @ 4Ω) 50 A & B Ch – 90 C Ch
- Size W x D x H mm (in.) 170 x 349 x 46.70 – (6.69' x 13.74' x 1.84')
