- מותג: Hertz
- דגם: ML Power 4
- גליון נתונים טכני: לחץ להורדה
- מדריך למשתמש: לחץ להורדה
Mille power amplifiers are born to fully enhance the outstanding performance of the Mille speakers.
The new ADC (ADVANCED D-CLASS TECHNOLOGY) ensures pure listening pleasure while keeping a compact size with unmatched power efficiency. The heat sink, engineered with double technology, extrusion and aluminium die-casting, enables the Mille Power amplifiers to work constantly at full power without ever overheating, further maximizing thermal efficiency. The Hertzaudio car amplifier ML Power 4 (4 x 250 W 2 Ω) is the obvious choice for a top level front-rear Mille system.
Data table
Channel mode | 4 – 3 – 2 |
Output Power (RMS) @ 14.4 VDC |
4 Ch 150 W x 4 (4Ω) 4 Ch 250 W x 4 (2Ω) 3 Ch 150 W x 2 (4Ω) + 500 W x 1 (4Ω) 3 Ch 250 W x 2 (2Ω) + 500 W x 1 (4Ω) 2 Ch 500 W x 2 (4Ω) |
Filters Bypass Hi-Pass Lo-Pass |
Yes A: 50 ÷ 5k @ 12 dB/Oct. – B: 80 ÷ 3.3k Hz @ 12 dB/Oct. A: 50 ÷ 5k @ 12 dB/Oct. – B: 80 ÷ 3.3k Hz @ 12 dB/Oct. |
Distortion – THD (100Hz @ 4Ω) |
0.08 % |
S/N Ratio (A weighted @ 1V) |
100 dB |
Damping factor (100Hz @ 4Ω) |
80 |
Size W x D x H mm (in.) |
170 x 289 x 46.70 (6.69' x 11.38' x 1.84') |
Technologies
-
ADVANCED D-CLASS TECHNOLOGYEnsures pure listening pleasure while keeping a compact size with unmatched power efficiency.
-
LEDS STATUS DISPLAY
It monitors the amplifiers operating status in real time pointing out possible faults such as overheating, excessive loads on the outputs or short-circuits on cables or loudspeakers. This information allows the user to identify possible issues with the installation and to intervene before the amplifier goes into protection to prevent any damages.
-
HDP IN & ART(TM)
The ML Power IN module features a Speaker In input (with balanced circuitry minimizing noise) for OEM head units and an RCA IN input for aftermarket sources. When the Speaker In is used, the ART™ function (Automatic Remote Turn On-Off) is enabled, managing the amplifier remote turn on to avoid unpleasant “bumps”.
-
ADVANCED HEATSINKThe heat sink, engineered with double technology, extrusion and aluminium die-casting, enables the Mille Power amplifiers to work constantly at full power without ever overheating, further maximizing thermal efficiency.
- Channel mode 4-3-2
- Output Power (RMS) @ 14.4 VDC :
4 Ch 150 W x 4 (4Ω)
4 Ch 250 W x 4 (2Ω)
3 Ch 150 W x 2 (4Ω) + 500 W x 1 (4Ω)
3 Ch 250 W x 2 (2Ω) + 500 W x 1 (4Ω)
2 Ch 250 @ x 2 (4Ω) -
Filters :
Bypass Yes
Hi-Pass A: 50 ÷ 5k @ 12 dB/Oct. – B: 80 ÷ 3.3k Hz @ 12 dB/Oct.
Lo-Pass A: 50 ÷ 5k @ 12 dB/Oct. – B: 80 ÷ 3.3k Hz @ 12 dB/Oct.
-
Distortion – THD (100Hz @ 4Ω) 0.08%
-
S/N Ratio (A weighted @ 1V) 100 dB
-
Damping factor (100Hz @ 4Ω) 80
-
Size W x D x H mm (in.) 170 x 289 x 46.70 (6.69' x 11.38' x 1.84')