אתה לא מחובר.

תפריט משתמש
תמונה ראשית

AV quattro | 800 W POWER AMPLIFIER

תמונה קטנה תמונה קטנה תמונה קטנה
סרטון
תיאור המוצר
AV quattro is a four-channel amplifier which can work in four, three, two channel mode, delivering 1700 W (RMS) power total.
It is designed to handle complex configurations as front/rear and multi-channel systems. AMP (Amplifier Management Processor) constantly checks the operating status system and communicates with the user through 4 different coloured LEDs, located on the top panel; ART (Automatic Remote Turn On-Off) allows automatic turn-on/off when a remote signal isn’t available from the source; up to 24 dB/Oct. slope crossovers allow to build front-rear, front-sub or multi-amplified systems while still ensuring a non-filtered output signal to expand the system.

Power Output

Load Imp. 4 Channels 3 Channels 2 Channels
4 Ohm 120 W x 4 120 W x 2 + 400 W x 1 400 W x 2
4/2 Ohm 120 W x 2 + 200 W x 2
2/4 Ohm 200 W x 2 + 400 W x 1
2 Ohm 200 W x 4

Accessories
  • VCRA – Remote Sub Volume Control
  • Analog Remote Volume Control to drive the subwoofer in mono, by connecting the external subwoofer volume to the special sub volume socket (only with analog inputs).
  • AV bit IN HD
  • Digital interface for all AV amplifiers. It offers one AD Link and AC Link input as well as one AD Link and AC Link output for a perfect digital connection with digital processors (bit one and bit Ten D) to drive a multi-amplified system.
מפרט טכני
  • POWER SUPPLY :
    Power supply voltage:  
    11 ÷ 15 VDC
    Idling current:   1.8 A
    Idling current when off:   0.02 mA
    Consumption @ 14.4 VDC (Max Musical Power):   55 A
  • AMPLIFIER STAGE :
    Distortion – THD (1kHz @ 4Ω):
       0.04 %
    Bandwidth (-3 dB):   4 ÷ 60k Hz
    S/N ratio (A weighted @ 1V):   100 dBA
    Damping factor (1k Hz @ 4Ω):   100
    Input sensitivity:   0.3 ÷ 5 V RMS
    Input impedance:   15k Ω
    Speaker-In sensitivity:   1.4 ÷ 24 V RMS
    Speaker-In impedance:   5k Ω
    Minimum load impedance:   2Ω
    NOMINAL POWER (RMS) @ 12 VDC, THD 0.3%, 4Ω:   100 W
    OUTPUT POWER (RMS) @ 14.4 VDC,THD 1%:
    • 4 Ch:  
    120 W x 4 (4Ω)
    • 4 Ch:   200 W x 4 (2Ω)
    • 4 Ch:   120 W x 2 (4Ω) + 200 W x 2 (2Ω)
    • 3 Ch:   120 W x 2 (4Ω) + 400 W x 1 (4Ω)
    • 3 Ch:   200 W x 2 (2Ω) + 400 W x 1 (4Ω)
    • 2 Ch:   400 W x 1 (4Ω) + 400 W x 1 (4Ω)
  • CEA SPECIFICATIONS :
    Output power @ 4Ω, 1% THD+N, 14.4 V:  
    120 W x 4 Ch
    SN ratio (ref. 1 W output):   80 dBA
  • SIGNALS INPUTS / FILTERS :
    Inputs:  
    Pre IN / Speakers IN
    Outputs:   Pre OUT Full Range
    A Ch & B Ch Filters (Full / Hi-Pass / Lo-Pass):
    50 ÷ 50k Hz (2 range) @ 12 dB/Oct.
    B Ch Filter (Lo-Pass 24 dB mono):
    50 ÷ 500 Hz @ 24 dB/Oct.
  • OTHER FUNCTIONS :
    Remote IN:  
    7 ÷ 15 VDC – 1mA
    Remote OUT:   12 VDC – 50mA
    Fuse (Strip type):   60 A
    Remote SUB volume adj. (B Ch Lo-Pass 24 dB):   (-50 ÷ 6) dB
    Speakers IN Turn-on (ART):   Selectable
  • SIZE / WEIGHT :
    Max size (mm/inches):  
    220 x 470 x 58 / 8,66” x 18,50” x 2,28”
    Weight (kg/lb):   7.2 / 15.87
סרטון