סרטון
תיאור המוצר
- מותג: Audison
- דגם: AV due
- גליון נתונים טכני: לחץ להורדה
- מדריך למשתמש: לחץ להורדה
AV due is a powerful stereo amplifier.
The power supply section and final stage, designed to work also in mono and tri-mode, ensure very high output current, with powers up to 900 W (RMS).
AMP (Amplifier Management Processor) constantly checks the operating status system and communicates with the user through 4 different coloured LEDs, located on the top panel; ART (Automatic Remote Turn On-Off) allows automatic turn-on/off when a remote signal isn’t available from the source.
The power supply section and final stage, designed to work also in mono and tri-mode, ensure very high output current, with powers up to 900 W (RMS).
AMP (Amplifier Management Processor) constantly checks the operating status system and communicates with the user through 4 different coloured LEDs, located on the top panel; ART (Automatic Remote Turn On-Off) allows automatic turn-on/off when a remote signal isn’t available from the source.
Power Output
| Load Imp. | Stereo | Mono |
| 4 Ohm | 260 W x 2 | 900 W x 1 |
| 2 Ohm | 450 W x 2 | – |
Accessories
- AV bit IN HD
Digital interface for all AV amplifiers. It offers one AD Link and AC Link input as well as one AD Link and AC Link output for a perfect digital connection with digital processors (bit one and bit Ten D) to drive a multi-amplified system.
- VCRA – Remote Sub Volume Control
- Analog Remote Volume Control to drive the subwoofer in mono, by connecting the external subwoofer volume to the special sub volume socket (only with analog inputs).
מפרט טכני
- POWER SUPPLY :
Power supply voltage: 11 ÷ 15 VDC
Idling current: 1.7 A
Idling current when off: 0.02 mA
Consumption @ 14.4 VDC (Max Musical Power): 65 A - AMPLIFIER STAGE :
Distortion – THD (1kHz @ 4Ω): 0.04 %
Bandwidth (-3 dB): 4 ÷ 60k Hz
S/N ratio (A weighted @ 1V): 100 dBA
Damping factor (1k Hz @ 4Ω): 120
Input sensitivity: 0.3 ÷ 5 V RMS
Input impedance: 15k Ω
Speaker-In sensitivity: 1.4 ÷ 24 V RMS
Speaker-In impedance: 5k Ω
Minimum load impedance: 2Ω
NOMINAL POWER (RMS) @ 12 VDC, THD 0.3%, 4Ω: 210 W x 2
OUTPUT POWER (RMS) @ 14.4 VDC,THD 1%:
• 2 Ch: 260 W x 2 (4Ω)
• 2 Ch: 450 W x 2 (2Ω)
• 1 Ch: 900 W x 1 (4Ω) - CEA SPECIFICATIONS :
Output power @ 4Ω, 1% THD+N, 14.4 V: 260 W x 2 Ch
SN ratio (ref. 1 W output): 80 dBA - SIGNALS INPUTS / FILTERS :
Inputs: Pre IN / Speakers IN
Outputs: Pre OUT Full Range
Filters (Full / Hi-Pass / Lo-Pass):
50 ÷ 5k Hz (2 range) @ 12 dB/Oct.
Filter (Lo-Pass 24 dB mono):
50 ÷ 500 Hz @ 24 dB/Oct. - OTHER FUNCTIONS :
Remote IN: 7 ÷ 15 VDC – 1mA
Remote OUT: 12 VDC – 50mA
Fuse (Strip type): 60 A
Remote SUB volume adj. (with Lo-Pass 24 dB): (-50 ÷ 6) dB
Speakers IN Turn-on (ART): Selectable - SIZE / WEIGHT :
Max size (mm/inches): 220 x 470 x 58 / 8,66” x 18,50” x 2,28”
Weight (kg/lb): 7.2 / 15.87
סרטון
