אתה לא מחובר.

תפריט משתמש
תמונה ראשית

APS 8 D | SUBWOOFER

תמונה קטנה תמונה קטנה תמונה קטנה
סרטון
תיאור המוצר
The APS 8 D is designed to deliver maximum performance in a sealed enclosure with ultra-compact volumes from 7.5 lt. to 8.5 lt. It features push connectors for ease of wiring and configurations and has been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the “rocking-mode” phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth.

1 Ultra-low profile (3.11 in. / 79 mm) for maximum installation
flexibility.
2 Designed to deliver maximum performance in a sealed enclosure
starting from 7.5 lt.
3 Special designed cone-dustcap-basket geometry which
guarantees a long linear excursion capability (almost 9 mm,
one-way) while keeping the mounting depth to minimum.
4 Air vents on the basket underneath the spider, eliminating the
need for the central pole vent allowing mounting close to rear wall
of enclosure.
5 Massive motor assembly optimized with FEM (Finite Element
Modeling) for perfect control under high power, high excursion
conditions.
6 Water-repellent treated paper 8 in. cone featuring a profile
developed with simulation and optimized with the Klippel Scan
Vibrometer.
7 Dual voice coil design specifically developed to be combined with
either AP8.9 bit (2 CH + 2 CH bridged), AP5.9 bit (Sub CH)
or AP4.9 bit/AP4 D (2 CH bridged) amplifiers.
8 Steel mesh grille and plastic gasket included.


Technical Data

Comp Double coils Subwoofer
Size 200 mm (8")
Power Handling 250 W Continuous Power
500 W Peak Power
Impedance 4 Ω + 4 Ω
Sensitivity 83,5 dB
Magnet High density flux ferrite
Cone Cotton-Fibre pressed paper
Xmech 16,5 mm (0.65 in.)

 

מפרט טכני
  • TECHNICAL SPECIFICATIONS :
  • Component   SUBWOOFER
  • Subwoofer size mm (in.)   200 (8)
  • Subwoofer Voice coil Ø mm (in.)   40 (1.57)
  • Power handling W
    peak  
    500
    continuous   250
  • Impedance Ω   4+4
  • Centre to centre distance mm (in.)   207 (8.15)
  • Midrange magnet size D·d·h mm (in.)   120 (4.72) x 50 (1.97) x 28 (1.1)
  • Total driver displacement l (cu.in.)   0,67 (0.01)
  • Hole diameter mm (in.)   5 (0.2)
  • Weight of one speaker kg (lb)   3,1 (6.83)
  • Magnet   High density flux ferrite
  • Cone   Water repellent pressed paper
  • *Xmech mm (in.)   ±16,5 (0.65)
סרטון