- מותג: Audison
- דגם: AP F8.9 bit
- גליון נתונים טכני: לחץ להורדה
- מדריך למשתמש: לחץ להורדה
The new AP F8.9 bit is the ideal for the most demanding integration projects, where high power is required along with the flexibility of the nine-channel DSP. The word “Forza”, meaning “Power” in Italian, well describes the 8 x 85 W RMS and 4 x 260 in bridge mode (RMS @ 4Ω), with an optimal power to size ratio. The integrated processor is equipped with a dedicated software and 7 pre-configured presets for a Plug & Sound experience. Thanks to the built-in Audison USS technology (Universal Speakers Simulator), AP F8.9 bit can also be correctly connected to head-units with “speaker load detection” function that monitors the presence of a low-impedance load to enable the audio outputs.
| Load Imp. | 8 Channels | 4 Channels (bridge) |
| 4 Ohm | 85 W x 8 | 260 W x 4 |
| 2 Ohm | 130 W x 8 |
The new Audison DRC MP (Digital Remote Control Multimedia Play) is compatible with all the Audison electronics featuring AC Link bus. Its slim profile along with the holder supplied with it eases the installation in the best position inside the car. Thanks to the new Joystick, “Rubber Touch” finished for best control of the movements along the four direction axes, the “DRC Settings” menu can be adjusted and navigation is also possible through the “Navi Command” function if the system features an Audison bit Play HD with video output connected to a monitor.
DRC AB enables the main system control (volume, balance, fader and subwoofer volume, bass-boost) without the use of a PC. Thanks to this device, installed in an ergonomic position within the car dashboard, the user can: choose between the four DSP presets and select the source among master, auxiliary and the two optical digital inputs.
USE
The C2O interface converts the signals coming from the coaxial digital input and from the analog AUX-IN into a TOSLINK optical digital output signal (up to 24 bit/192kHz).
The conversion allows the integration of thenew Hi-Res portable devices equipped with coaxial digital output (75Ω) and smartphones with analog output on 3.5 mm mini Jack (also 4 poles) with Audison processors featuring an optical digital input compatible with the resolution of the signal sent to the C20.
Thanks to its extreme compactness, the C20 can be installed in a hidden position on the dashboard, drastically reducing the length of the cabling between the portable player and the receiving device nullifying in this way any issues with interfacing.
FEATURES
The coaxial digital input is provided with anisolation transformer that improves the balance between the transmitter and the receiver circuit, reducing noise due to EMI electromagnetic interference, which is particularly insidious inside the passenger compartment.
The AUX-IN input is equipped with a pre-amplifier with adjustable gain of 0.1V ÷ 2V for an optimal coupling with each device before the Analog-Digital conversion is performed by a high quality converter at a resolution of 24 bit/48 kHz.
For maximum ease of use in cars, the C2O independently selects the input with priority assigned to the AUX-IN. With the default setting, after 6 seconds of no analog signal, the C2O moves to the coaxial digital input. An internal switch allows for the time before the switch to be set to 9 or 12 seconds.
This optional highly flexible adapter, made with automotive grade parts, allows the use of Prima Extension cables also for AP F8.9 bit amplifier without the need for any soldering.Compatible with:
Extension Input
Extension Input/Output:
Six stereo RCAs interconnection to connect Prima APF 8.9 bit with after-market sources with PRE-OUT outputs
Cable with 6 pairs of labeled wires to connect AP/ APF 8.9 bit with the high level output of OEM sources
Cable with eight pairs of labeled cables to connect the speakers to the AP/ APF 8.9 bit amplifiers
Stereo passive mixer (unpowered) featuring 4 input channels and 2 output channels, designed for active OEM multi-way systems where each speaker is powered by one specific amplified channel. SPM4 mixes audio through 4 audio transformers specifically developed to achieve very low distortion and highly linear acoustic response. SPM4 provides the ability to mix the midrange/woofer and tweeter channels coming from the amplifier and supply one single mid-high channel. The Ch1(L/R) channels feature two inputs, one features an inverting input compared to Ch2 (L/R) channels; the mixing process often gives better results when one of the two channels undergoes a 180° dephasing. SPM4 is especially recommended to extend the number of inputs of the Audison digital processors or amplifiers with built-in DSP because they feature a De-equalizer (De-Eq). In that case, any possible non-linear acoustic emissions due to the mixing of the pre-existing filtered channels are duly compensated.
Optical adapter to extend optical cables featuring TOSLINK connectors.
PACKAGE: Polybag – Qty. 1
Optical digital audio signal cable, designed for car audio applications, allowing the transfer of the optical signal without signal loss. An especially thicker sheath protects the optical fibre to prevent the cable from damages if it is pressed against sharp edges. The sturdy connector connector protects the optical fibre along its full length, ensuring a stable transmission of the signal also in the event of strong vibrations. Ending with Toslink connectors for S/PDIF digital audio signals.
Cable length 4,5 m/177,16”
PACKAGE: Polybag Qty. 1
Optical digital audio signal cable, designed for car audio applications, allowing the transfer of the optical signal without signal loss. An especially thicker sheath protects the optical fibre to prevent the cable from damages if it is pressed against sharp edges. The sturdy connector protects the optical fibre along its full length, ensuring a stable transmission of the signal also in the event of strong vibrations. Ending with Toslink connectors for S/PDIF digital audio signals.
Cable length 1,5 m / 59,05”
PACKAGE: Polybag Qty. 1
It is a kit composed of a cable and an adapter allowing a 2 m / 78.74 in. additional extension of the cable supplied with the DRC. This extension is required for installations on especially long vehicles such as SUV’s. Total length of the supplied cable with the extension is equal to 6,5 m / 225.90 in.
PACKAGE: Polybag – Qty. 1
- POWER SUPPLY:
Power supply voltage / fuse 11 ÷ 15 VDC / 2 x 30A
Operating power supply voltage 6.5V ÷17V
Idling current 1.6 A
Switched off without DRC 1.7mA
Switched off with DRC 5 mA
Consumption @ 14.4 VDC, 2Ω, Max Musical Power 55 A
Remote IN 6 ÷ 15 VDC (1 mA)
Remote OUT 4 ÷ 15 VDC (150 mA)
ART – Automatic Remote Turn on/off from OUTPUT BTL speakers (Selectable) 2 ÷ 7 VDC
AST – Automatic Signal Turn on/off (Selectable) Speaker-In - AMPLIFIER STAGE:
Distortion – THD @ 1 kHz, 4Ω, 70% Rated Power 0,06%
Damping factor @ 1 kHz, 4Ω, 2 VRMS > 110
Bandwidth @ -1.5 dB 10Hz ÷ 22kHz
S/N ratio (A weighted @ 1 V Input) Master Input 100 dBA
S/N ratio (A weighted @ 1 V Input) Optical Input 105 dBA
Input sensitivity Pre-In 0.6 ÷ 6 VRMS
Input sensitivity Speaker-In 2.2 ÷ 22 VRMS
Minimum load impedance:
8Ch: 2Ω
4Ch – (Bridge 1/2; 3/4; 5/6; 7/8) : 4Ω - OUTPUT POWER (RMS) @14.4 VDC, 1% THD:
8Ch @ 4Ω 85 W x 8
8Ch @ 2Ω 130 W x 8
4Ch (Bridge 1/2; 3/4; 5/6; 7/8) @ 4Ω 260 W x 4 - INPUTS / OUTPUTS:
Pre-In Inputs Ch1 ÷ Ch6 customizable
Speaker-In Inputs Ch1 ÷ Ch6 customizable
Digital IN 1 x Optical S/PDIF; Max 192 kHz / 24 bit
Sub Out (RCA Pre Out) 4 VRMS - DIGITAL SIGNAL PROCESSOR:
Filter type Full / Hi pass / Low Pass / Band Pass
Filter mode and slope Linkwitz @ 12/24 dB – Butterworth @ 6/12/18/24 dB
Crossover frequency 68 steps @ 20 ÷ 20k Hz
Phase control 0° / 180°
Bass Boost N.1 Adjustable Parametric Pole
Analog Input Equalizer (20 ÷ 20k Hz) Automatic De-Equalization
Output Equalizer N.9 Parametrics Equalizers: ±12 dB;10 pole; 20 ÷ 20k Hz
Time Alignment Distance 0 ÷ 510 cm / 0 ÷ 200.8 inches
Time Alignment Delay 0 ÷ 15 ms
Time Alignment Step 0.08 ms; 2.8 cm / 1.1 inch
Time Alignment Fine SET 0.02 ms; 0.7 cm / 0.27 inch
Preset (Drive Preset) Rotary switch for 7 installation Presets
Acoustic Preset N.2 DSP Memory, DRC selectable - CONTROL CONNECTIONS:
From / To Personal Computer 1 x Micro USB
To Audison DRC AB / MP 1 x AC Link
Optical select Optical select wire control +12 V enable
Master enable Master enable wire control +12 V enable - GENERAL REQUIREMENTS:
PC connections Micro USB 1.1 / 2.0 / 3.0 Compatible
Software/ PC requirements Microsoft Windows (32/64 bit): Vista, Windows 7, Windows 8, Windows 10
Video resolution with screen resize min. 1024 x 600
Ambient operating temperature range 0 °C to 55 °C (32 °F to 131 °F) - SIZE:
Max size W x H x D (mm/inch) 238 x 49.5 x 155 / 9.37 x 1.95 x 6.1
Weight (kg/lbs) 1.98 / 4.36
