אתה לא מחובר.

תפריט משתמש
תמונה ראשית

AP4 D | AMPLIFIER

תמונה קטנה תמונה קטנה תמונה קטנה
סרטון
תיאור המוצר
The AP4 D amplifier was designed as an extension for the AP 4.9 bit and AP 5.9 bit amplifiers, offering 4 additional 70 W amplified channels.

Power Output

Load Imp. 4 Channels 2 Channels (bridge)
4 Ohm 70 W x 4 260 W x 2
2 Ohm 130 W x 4

 

מפרט טכני
  • POWER SUPPLY :
    Voltage:  
    7.5 ÷ 15 VDC
    Idling current:   1 A
    Switched off:   <0.05 mA
    Consumption @ 14.4 VDC 2Ω Max Musical Power (without CPL):   27 A
    Remote IN   7 ÷ 15 VDC (1 mA)
    Fuse   30 A
  • AMPLIFIER STAGE :
    Distortion – THD @ 1 kHz, 4 Ω, 90% Output Power: 0.1 %
    Bandwidth @ -3 dB, 2 V RMS, 4Ω:   10 ÷ 30k Hz
    S/N ratio @ A weighted, 1,5V, Max Power:   100 dBA
    Damping factor @ 1 kHz, 2 VRMS, 4Ω   170
    Input sensitivity PRE IN: Selectable:   1,5 – 3 – 4,5 V RMS
    Input sensitivity SPEAKER IN: Selectable:   3 – 6 – 9 V RMS
    Input impedance:   15k Ω
    LOAD IMPEDANCE (MIN):
    • 4 Ch:   1-2-3-4 2Ω
    • 2 Ch:   Bridge (1-2) (3-4) 4Ω
    MAX POWER   520 W
    OUTPUT POWER (RMS) @ 14.4 VDC, 1% THD:
    • 4 Ch @ 4Ω:   70 W x 4
    • 4 Ch @ 2Ω:   130 W x 4
    • 2 Ch – (Bridge 1/2; 3/4) @ 4Ω   260 W x 2
    OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD:
    • 4 Ch @ 4Ω:   90 W x 4
    • 4 Ch @ 2Ω:   180 W x 4
    • 2 Ch – (Bridge 1/2; 3/4) @ 4Ω   360 W x 2
  • CEA SPECIFICATIONS :
    Output power @ 4Ω, ⩽1% THD+N, 14.4 V:   70 W x 4
    SN ratio (ref. 1 W output):   85 dBA
  • SIGNAL CONNECTIONS :
    PRE IN   RCA
    SPEAKER IN   wired
    MUTE (Energy Saving Control)   wired from AP4.9 bit / AP5.9 bit
  • GENERAL REQUIREMENTS :
    Ambient operating temperature range:  
    0 °C to 55 °C (32°F to 131°F)
  • SIZE / WEIGHT :
    Max size (mm/in.):   198 x 45,50 x 134 / 7.8 x 1.8 x 5.27
    Weight (kg/lb):   1.33 / 2.93
סרטון